kalain Posted January 4, 2013 Report Posted January 4, 2013 Hi, When Tray window is displayed under thumbnail windows, you can't see thumbnail tray slider size (on the right) except if your Tray window has a high vertical size!! In my 13" laptop screen Tray window has to be at least 1/3 of the 13" screen to see the slider! In 'normal' mode, I use Tray height at 1/5 or 1/6 of the screen. Regards Quote
Murat Posted January 7, 2013 Report Posted January 7, 2013 Hi Alain, Yes. The problem with tray scrollbar is there. As a temporary solution you can use Ctrl + MouseWheel to zoom in/out the tray thumbnails. Quote
kalain Posted February 3, 2013 Author Report Posted February 3, 2013 Hi Alain, Yes. The problem with tray scrollbar is there. As a temporary solution you can use Ctrl + MouseWheel to zoom in/out the tray thumbnails. Not easy with a laptop. (no mouse, sorry) Any fix news about this one ? Thanks Quote
kalain Posted February 5, 2013 Author Report Posted February 5, 2013 I'm doing a little up for few posts because yesterday I got an internet error and posts were still down in forum page. (I'm using a satellite connection to follow Daminion development.) Quote
kalain Posted January 17, 2014 Author Report Posted January 17, 2014 Hi, From an old post. (711 build) Is there any plans to fix this ? (In order to use correctly all Tray window feature) Quote
Murat Posted January 17, 2014 Report Posted January 17, 2014 If the tray height is lets say 200 px there is no room for 2 scrollbar controls, this is why we hide the zoom scrollbar. Maybe two scrollbars side by side... Quote
kalain Posted January 17, 2014 Author Report Posted January 17, 2014 Maybe two scrollbars side by side... Yes, this is a good idea because I think most of the time Tray window has not a big height. Specially if you use a 13/14/15" screen on a laptop. (This is another story if you use a 24/30" wide screen...) Quote
Uwe Posted January 17, 2014 Report Posted January 17, 2014 Hello, in Adobe Bridge, Photoshop, Lightroom, in XNView the slider are in a horizontal position. Why not positioning the slider horizontally in the bottom status bar of the window? Regards, Uwe Quote
kalain Posted January 18, 2014 Author Report Posted January 18, 2014 in Adobe Bridge, Photoshop, Lightroom, in XNView the slider are in a horizontal position. Why not positioning the slider horizontally in the bottom status bar of the window? For a window which is wide (small height compared to width), if you put slider in horizontal position this will take (and waste) much more space in the screen than an vertical sliding bar. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.